|
|
IDENTIFICATION SERVEUR : 10.0.97.65 - CLIENT : 54.81.71.187 |
|
Voir le sujet précédent :: Voir le sujet suivant |
Auteur |
Message |
toinet Site Admin
Inscrit le: 15 Juin 2007 Messages: 2928 Localisation: Le Chesnay, France
|
Posté le: Dim 19 Juin 2016, 17:36 Sujet du message: Le voleur (VIFI Sogiciel, 1982) |
|
|
#880 - This is the French version of Thief by Datamost. Seven levels to pass to qualify as the master of thieves of the galaxy!
Disk structure
This is a standard 16-sec disk, under DOS 3.3 that cannot be copied with Locksmith. It shows the A error code, meaning that, at least, the address field cannot be read. An analysis with Copy II plus shows that there is no extra track.
Protection type
Locksmith was right. This is a change of epilog markers in the address field:
- D5AA96 DEDEEB (instead of DEAAEB)
- D5AAAD DEAAEB, std for the data field.
The second part is that the epilog value is checked in the DOS 3.3 code. If it finds a different value, it reboots. So, we'll do what we did with the original version of Le voleur: replace the DOS 3.3
How to copy
Boot a DOS 3.3 master disk and
Code: |
Insert a blank disk in drive 2
INIT HELLO,D2
|
Now, boot my copy disk and
Code: |
Type 4 to launch Advanced demuffin 1.4
Insert Le voleur in drive 1
Press B to boot
Copy disk from drive 1 to drive 2 from T3 to T22, S0/F, 16-sec mode
|
Done.
How to normalize
Boot my copy disk and
Code: |
Type 2 to launch Disk Fixer v4
Insert your copy of Le voleur in drive 1
T0/S3/9B: DE -> AA (for read)
T0/S6/B3: DE -> AA (for write)
|
That's all!
The disk image is available at http://www.brutaldeluxe.fr/crack/ and http://www.brutaldeluxe.fr/products/france/vifi/
Reboot and... enjoy,
LoGo
6/2016 |
|
Revenir en haut de page |
|
 |
|
|
Vous ne pouvez pas poster de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets dans ce forum Vous ne pouvez pas éditer vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|
|